Overview
Specification
Standard Pull Cord Length 160mm.
Other Pull Cord lengths available at an extra cost.
Our Inflators are availabe with either 'D' or 'O' manifold fixing attachments. Please get in touch for further information.
Micro Manual Inflator
Launched in 2017 the Micro Manual lifejacket inflator replaces the Compact Mini Manual Inflator. Being 6mm shorter and 15 grams lighter this new smaller, lightweight product is used in both commercial and leisure applications.
The unit is manually activated to initiate lifejacket inflation.
This inflator will not activate on contact with water and the user is required to activate this inflator by pulling firmly on the yellow pull toggle to inflate the life jacket.
The product is approved in accordance with the ISO12402 Part 7 standard requirement for lifejackets.
The units are available on demand, with re-charge kits being stocked by most distributors of marine products’ Note: - UML only supply to trade customers.
For the Manifold Fixing and Oral Tube as well as Spares & Technical Data, please use the Contact Us facility below.
Re-arming
Micro Manual Rearm Instructions
The indication on the Micro Manual Inflator manual only activated inflator allows the user to establish if the system has been fired. This inflator does not indicate if a pierced CO2 cylinder is accidentally refitted to the inflator during the servicing procedure.
The CO2 cylinder must be checked each time you don your lifejacket to ensure it is not pierced and it is tightly screwed in by hand.
This inflator will not activate on contact with water and the user is required to activate this inflator by pulling firmly on the yellow pull toggle to inflate the lifejacket.