Standard Pull Cord Length 160mm.
Other sizes available at an extra cost.
Our inflators are available in either 'D' or 'O' manifold fixing attachments. Please get in touch for further information.
UML only supply trade customers. For service kits please contact your Lifejacket Manufacturer, Approved Lifejacket Service Station, Local or Online Chandlers.
Compact Mini Manual Inflator
The Mini Manual lifejacket inflator is a small, strong, lightweight product used in both commercial and leisure applications. The unit is manually activated with the minimum pull force required to initiate lifejacket inflation.
This inflator will not activate on contact with water and the user is required to activate this inflator by pulling firmly on the yellow pull toggle to inflate the life jacket.
The product is approved in accordance with the ISO12402 Part 7 standard requirement for lifejackets.
The units are available on demand, with re-charge kits being stocked by most distributors of marine products.UML only supply to trade customers.
For the Manifold Fixing and Oral Tube as well as Spares & Technical Data, please use the Contact Us facility below.
Compact Mini Manual Rearm Instructions
The indication on the standard on the compact Manual Only activated inflator allows the user to establish if the system has been fired. This inflator does not indicate if a pierced CO2 cylinder is accidentally refitted to the inflator during the servicing procedure.
The CO2 cylinder must be checked each time you don your lifejacket to ensure it is not pierced and it is tightly screwed in by hand.
This inflator will not activate on contact with water and the user is required to activate this inflator by pulling firmly on the yellow pull toggle to inflate the lifejacket.